Speedball Diazo Photo Emulsion is used to prepare a screen for the photo emulsion screen printing process. ONE FULL OUNCE of Diazo Sensitizer is required to make 6.6 ounces of sensitized Photo Emulsion.
To use: Thoroughly combine the Emulsion with the Sensitizer then apply it to your screen and let it dry. Once the emulsion is dry, simply lay down and tape your positive print or transparency sheet flush against the emulsion coated surface and expose it to light. Once mixed, the sensitized emulsion will last up to 4 weeks when stored (closed) at 90F, up to 8 weeks stored at 70F, and up to 4 months when refrigerated. If you need to remove the dried emulsion for any reason, use Photo Emulsion Remover for best results.
6.6 oz. Jars
Made in: UNITED STATES (USA)
Speedball Diazo Photo Emulsion FAQ
Question:
How many 10" x 14" screens can I produce with mixed Diazo Photo Emulsion?
Answer:
4 liquid ounces = 7 screens, 8 liquid ounces = 14 screen, 32 liquid ounces = 55 screens.
Question:
Can I use a Plastisol ink with Diazo Photo Emulsion?
Answer:
Yes, you can. Wash out with mineral spirits.
Question:
I want to use the photo emulsion method in a project where I will be transferring text and drawings to steel through the use of galvanic corrosion. The resist must hold up to about one hour submersion in a water solution. Will Diazo Photo Emulsion do this?
Answer:
The sensitized and properly exposed photo emulsion will withstand the water immersion. A post exposure of about 10 minutes, or longer, to sunlight will insure and improve the water resistance.
Question:
When should I use Photo Emulsion Remover? Is there any other way to remove Photo Emulsion from the screen?
Answer:
You use the Remover when you want to reclaim the screen for another design. No, there is no other way to remove the Diazo Photo Emulsion from the screen. You may replace the screen fabric by removing the cord, replacing the screen fabric and putting the cord back in. However, you need to be sure the tension is strong.
Question:
What is the longest time you can leave photo emulsion on a screen without damaging it?
Answer:
The length of time and high temperatures will make removal more difficult. Use the Diazo Photo Emulsion Remover per instructions.
Question:
How do I remove aged Photo Emulsion?
Answer:
Brush on Diazo Photo Emulsion Remover to both sides of the screen. Scrub with a dry nylon bristle brush on both sides. Repeat process. Allow to stand exactly 1 ½ minutes. Scrub on both sides with the brush. Repeat process. Continue repeating these steps until you note total dissolving/removal of the stencil. Finally, spray with a hard spray of very hot water, using a nylon bristle brush for complete cleaning. NOTE: The screen stencil must be kept wet with the remover throughout the entire removal procedure.
Question:
What is the exposure time for Halogen or Metal Halide lamps with Diazo Photo Emulsion?
Answer:
The basic exposure time for 12xx White Multifilament Polyester mesh (found in all of our kits) at a lamp height of 40 inches is as follows: 1000 watt=140 sec. 2000 watt=70 sec. 3000 watt=45 sec. 4000 watt=33 sec. 5000 watt=25 sec. The mesh variation factors are: Dyed fabric-1.75 305T mono white fabric-0.6 Above, finer than 305T-0.6 Above, coarser than 250T-1.0 The exposure distance factors are: 20”/50cm.=.25 24”/60cm=.36 28”/70cm=.49 36”/90cm=.81 40”/100cm=1.00 44”/110cm=1.21 48”/120cm=1.44 52”/130cm=1.69 56”/140cm=1.95 60”/150cm=2.25 Calculation example: If you are using a 2000 watt halogen light source, at a 48” exposure distance and the 12xx multifilament mesh, the exposure time calculation is (2000 w. lamp time) x (exposure distance factor) x (mesh factor) = 70 sec. x 1.44 x 1.0= 101 seconds
Average Customer Review
4.20
(15 Customer Reviews)
Click here to add or update a review for this product.
MOST HELPFUL REVIEWS
1/8/2013
5
I get it rigth first time )
Was this review helpful?
3 of 3 users found this review helpful.
3/30/2012
5
I'm a first time user and had good results. I didn't get an even coat on the screen application but pressed on. I had a halogen work light and guesstimated a 10 minute exposure at a 12 inch height. Propped two sticks across a couple of crates and set the light face down on them. I washed the screen out in the kitchen sink with the rinser thingy. The thick parts of the emulsion took more rinsing to was out. It looks like a good stencil that will work.
Was this review helpful?
3 of 3 users found this review helpful.
10/7/2010
5
I love this product It's easy to use (although a little thin) I coat it 3 times on each side and it works great. I expose all my images with sun light and it's is super fast 2-3 minutes at most and I get a perfect image every time..
Was this review helpful?
5 of 7 users found this review helpful.
4/30/2013
5
I've been using this stuff for 5 years. Easiest emulsion to use. Most of my screens are 14x16" and burn in 18-20min 18" away from two 75w bulbs. It takes a little longer if the screens are big. Perfect washout each time.
Was this review helpful?
2 of 3 users found this review helpful.
12/16/2011
5
Great product easy to use.
Was this review helpful?
2 of 3 users found this review helpful.
MOST RECENT REVIEWS
3/10/2013
4
Does just what it's supposed to!
Was this review helpful?
1 of 3 users found this review helpful.
2/3/2013
4
First time using a photo emulsion and sensitizer so it took awhile to get the hang of it. Make sure you don't spread it on too thick and keep wiping away the excess for about 30 minutes or until it starts to settle. Exposed it with a 320 watt bulb 20 inches high for 10 minutes and comes out perfect every time. Will buy again. Only reason i didn't give it 5 stars is it didn't come with allot of info!
Was this review helpful?
1 of 3 users found this review helpful.
7/13/2011
2
This product is not very reliable. Every time I go to make a new screen it takes me 3-4 tries to get it to wash out correctly. Even when I use the proper exposure time with the same screen. It either doesn't wash out and the image is just a ghost or the emulsion just falls of due to water being sprayed at it. I will definitely not be buying this emulsion again.
Was this review helpful?
1 of 3 users found this review helpful.
4/15/2010
5
As a product I am completely satisfied. I would like to see instructions on the label or in the box for the new user.
Was this review helpful?
2 of 4 users found this review helpful.
3/13/2010
3
pretty good gets the job done but is super drippy and pools up in spots. I won't be buying it again at least I plan on testing some other emulsions first.
Was this review helpful?
2 of 4 users found this review helpful.
11/5/2009
5
This was my first attempt at screen printing and it was awesome. I actually can't wait to order more and continue to get better at it. The best price on the internet!
Was this review helpful?
2 of 4 users found this review helpful.
8/27/2009
4
Takes some practice you really need a scoop coater to apply this stuff
Was this review helpful?
2 of 3 users found this review helpful.
8/24/2009
5
Works as stated. I still need to experiment to get the exposure right but the product is good.
Was this review helpful?
2 of 4 users found this review helpful.
Customer Comments
Show me another
Item Added to Cart
Item Not Added
